top of page

Radial Quarter-Sawn Hard Maple Hardwood Flooring


Our Radial Quarter-Sawn Hard Maple Flooring starts from hand selected veneer grade logs — a quality of log so high that no other manufacturer uses this grade of log. These logs are further inspected for uniformity in color, grain and diameter. This bright, creamy almost white wood’s appearance is complemented by its near perfect uniform grain structure of 80 - 90 degrees.

Hard maple.jpg
  • Grade: Exceeds NWFA/ NOFMA’s Clear standard

  • All White Color (zero brown heartwood)

  • Vertical grain structure of 80 - 90° (depending on log’s medullary rays)

  • Long lengths: 30" to 12' lengths averaging over 5' per board (longer by request)

  • Width: 3", 4" & 5" (special order widths available)

  • 3/4" thickness, other thicknesses available (1/2", 5/8"; & full 1" by use of other plywood

  • Tongue & grooved, end matched & relief bottoms to NOFMA standards

  • Moisture content of 7% to 9% unless otherwise specified

  • Finish: Unfinished or optional prefinishes (Hard Wax Oil or 100% solids UV cured
    Aluminum Oxide)

  • Construction: Industry leading full 12-ply engineered construction featuring 15mm
    exterior grade, CARB compliant Premium Russian Baltic Birch with a 4.5mm thick wear layer

  • SK-8 Glue (designed for wooden skateboards)

  • Cold Press clamping for a sure bond

  • Edge Treatments: Square, microbevel (mini or micro) and rolled (rounded)

bottom of page