top of page

Radial Quarter-Sawn American Black Walnut Hardwood Flooring

BlackCherry Streched.jpg

Our Radial Quarter-Sawn American Black Walnut Flooring starts from hand selected veneer grade logs — a quality of log so high that no other manufacturer uses this grade of log. These logs are further inspected for uniformity in color, grain and diameter. Our walnut is not steamed in order to maintain the greatest quality of color in our flooring. We remove all sapwood leaving only the rich brown heart wood.

  • Grade: Exceeds NWFA/ NOFMA’s Clear Standard

  • 100% Heart Wood (sapwood removed)

  • Unsteamed natural walnut color

  • Vertical grain structure of 80 - 90°

  • Long lengths: 30" to 12' lengths averaging over 5' per board (longer by request).

  • Width: 3", 4" & 5" (special order widths available)

  • 3/4" thickness, other thicknesses available (1/2", 5/8" & full 1" by use of other plywood thicknesses)

  • Tongue & grooved, end matched & relief bottoms to NOFMA standards

  • Moisture content of 7% to 9% unless otherwise specified

  • Finish: Unfinished or optional pre-finishes (Hard Wax Oil or 100% solids UV cured Aluminum Oxide)

  • Construction: Industry leading full 12-ply engineered construction featuring 15mm exterior grade,  CARB compliant premium Russian Baltic Birch with a 4.5mm thick wear layer

  • SK-8 Glue (used on wood skateboards)

  • Cold Press clamping for a sure bond

  • Edge Treatments: Square, microbevel (mini or micro) and rolled (rounded)

bottom of page